![]() ![]() Now use scanimage -list-devices to check whether sane is able to find your scanner. If so, you need to specify the IP address of the scanner in the /etc/sane.d/net.conf file. by WiFi, Sane may still be unable to find the scanner. # brsaneconfig4 -a name=Brother_DCP-元550CDW model=DCP-元550CDW nodename=BRWC0B5D72A0B87 It's also possible to add a scanner via its node name instead of its IP, for example: To get the IP and node name of your scanner, you can use Nmap: Now, the scanner should be recognized by SANE.įor network scanners, Brother provides a different configuration tool for each brscan version (e.g., brsaneconfig2 for brscan2 compatible devices): Each package seems to contain an exhaustive list of the models it is suitable to. ![]() Or extract each of the AUR packages below. Or see the information below for more scanners. Home > Country > Your model > FAQs & Troubleshooting > Linux > Scanner / Scan Key Tool > Scan using XSane or GIMP. To find the right one, see the FAQ for your model at the Brother Support, i.e. In order to install a Brother scanner or printer/scanner combo you need the right driver. Edit the head of /etc/sane.d/nf and configure the following two lines:įirmware /usr/share/sane/snapscan/u176v046.bin.Search the firmware image on the Internet and download it to /usr/share/sane/snapscan/.Go to snapscan main page and see whether your scanner is supported and which firmware you need (e.g, u176v046.bin).$ lsusb Bus 002 Device 010: ID 04a5:20b0 Acer Peripherals Inc. Find out which model you own and take note of the USB ID:.If you own an USB scanner from Acer (now BenQ), you need to download a suitable firmware binary and configure /etc/sane.d/nf. Tip: USB autosuspend can be disabled manually, or using powertop, TLP, or Laptop Mode Tools. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |